| IC-T82A
Specifications |
This information is taken
directly from IC-T82A brochure.
REVIEW COMMENTS ARE IN
RED.
|
| General |
 | Frequency coverage (Unit: MHz)
| 50 MHz |
144 MHz |
440 MHz |
Receive |
| 50-53.995 MHz |
144-148 MHz |
430-450 MHz *2 |
0.495 - 1319.995 MHz *1 |
*1 Except 824-849, 869-894 MHz cell
band; *2 Guaranteed 440-450 MHz only;
|
 | Mode: FM, WFM (Rx only), AM (Rx
only)
|
 | Number of memory channels: 555 (500
regular, 50 scan edges, 5 call) 5 CALL
CHANNELS ARE GREAT THIS WILL WORK GREAT FOR MOST HAMS NEEDS.
|
 | Frequency stability: ± 6 ppm (-10°C
to +60°C;)
|
 | Useable temperature range: -10°C to
+60°C;, +14°F to +140°F
|
 | Power supply : 6 V to 16 V DC or
specified battery pack
|
 | Current drain (at 8 V DC):
 | Tx VHF (high): 2.0 A
|
 | Tx UHF (high): 2.2 A
|
 | Rx rated audio: 220 mA
|
 | power save: 40 mA THIS
IS GREAT FEATURE. YOU WILL GET MANY HOURS OF RECEIVE TIME. |
|
 | Tuning steps (kHz): 5, 6.25, 8.33,
9, 10, 12.5, 15, 20, 25, 30, 50, 100
|
 | Antenna connector: SMA (50 ohm)
|
 | Dimensions (projections not
included):
 | 58(W) x 87(H) x 29(D) mm
|
 | 2 17/32(W) x 3 7/16(H) x 1
5/32(D) in |
|
 | Weight (approximate, with antenna
and BP-217):
 | 240 g; 8 15/32 oz. FITS
EASILY IN SHIRT POCKET |
|
|
| Transmitter |
 | Output power (at 8 V DC):
 | High: 5.0 W
|
 | Low: 0.5 W |
|
 | Modulation system: variable
reactance frequency modulation
|
 | Max. frequency deviation : ± 5.0
kHz
|
 | Spurious emissions : Less than -60
dB
|
 | External microphone connector :
3-conductor, 2.5(d) mm (1/8")/ 2 k ohm |
|
| Receiver |
 | Receive system: Double conversion
superheterodyne
|
 | Intermediate frequencies:
 | 1st: 130 MHz
|
 | 2nd: 455 kHz |
|
 | Sensitivity (except spurious
points):
 | FM (at 12 dB SINAD)
 | 1.625-4.995 MHz: 0.4 µV
|
 | 5-49.995 MHz: 0.32 µV
|
 | 50-54 MHz: 0.16 µV
|
 | 54.005-143.995 MHz: 0.18 µV
|
 | 144-148 MHz: 0.16 µV
|
 | 148.005-246.995: 0.4 µV
|
 | 247-429.995 MHz: 0.32 µV
|
 | 430-450 MHz: 0.16 µV
|
 | 450.005-832.995 MHz: 0.32 µV
|
 | 833-1319.995: 1.0 µV |
|
 | WFM (at 12 dB SINAD)
 | 76-108 MHz: 5.6 µV
|
 | 175-221.995 MHz: 10 µV
|
 | 470-770 MHz: 5.6 µV |
|
 | AM (at 10 dB S/N)
 | 0.495-4.995 MHz: 1.3 µV
|
 | 5-29.995 MHz: 1.0 µV
|
 | 118-136 MHz: 0.5 µV
|
 | 222-246.995 MHz: 0.79 µV
|
 | 247-329.995 MHz: 0.56 µV |
|
|
 | Selectivity (except WFM):
 | More than 15 kHz/-9 dB
|
 | Less than 30 kHz/-50 dB |
|
 | Spurious and image rejection ratio:
 | 50, 144 MHz: Less than -60 dB
|
 | 440 MHz: Less than -50 dB
|
 | (Except half IF, 2nd image, 50
MHz band IF and WFM) |
|
 | Audio output power (at 25°C): 250
mW typical at 10% distortion w/8 ohm load
|
 | AF output impedance: 8 ohms |
|
| Supplied
Accessories |
 | Battery pack (BP-217)
|
 | Wall charger (depending on version)
|
 | Antenna
|
 | Belt clip |
|
| Options |
 | BATTERY PACK AND CASE
 | BP-216 R6 (AA) batteries x 2
|
 | BP-217 Li-Ion 7.4 V/1300 mAh |
|
 | Approx. output powers (Tx: high; Rx:
Stand-by=5:5:90 %)
 | BP-216, 0.1 W typical THAT'S
RIGHT 1/10 WATT ON AA
BATTERIES
|
 | BP-217, 5 W typical |
|
 | BC-139 DESKTOP CHARGER, rapidly
charges battery pack BP-217. Both AC (using an AC adapter) and DC
can be used to power the charger. Charging time (approx.): 2 hours
|
 | CP-12L CIGARETTE LIGHTER CABLE WITH
NOISE FILTER, OPC-254L DC POWER CABLE, allows
you to operate the transceiver through a 12 V cigarette lighter
socket or a 6 V to 16 V external DC power supply with the CP-12L or
OPC-254L, respectively. The connected battery pack is charged
simultaneously.
|
 | SPEAKER-MICROPHONES
 | HM-54 Durable, full-sized
speaker-microphone.
|
 | HM-74 Compact and lightweight.
Equipped with an earphone jack.
|
 | HM-75A Allows you to remotely
select memory channels, operating frequency, etc. Simple remote
and normal remote are selectable.
|
 | HS-85 HEADSET, allows
hands-free operation. Includes VOX, PTT, "one-touch
PTT" (TOT).
|
 | HM-128 EARPHONE-MICROPHONE,
ideal for hands-free operation by
clipping the mic. with PTT switch to lapel or breast pocket..
|
 | SP-13 EARPHONE provides clear
audio in noisy environments |
|
 | AD-925MA ANTENNA CONNECTOR ADAPTER:
allows for connecting a BNC type antenna. IF
YOU PLAN TO USE A EXTERNAL ANTENNA THIS IS A MUST TO CONVERT TO A
BNC
CONNECTOR
|
 | BC-110A/D WALL CHARGER, regularly
charges battery packs. The same as supplied with some versions
|
 | CS-T82 CLONING SOFTWARE + OPC-478
CLONING CABLE, provides quick and easy programming of items,
including memory channels, memory names and set mode contents, for
local repeater frequencies, etc., via a PC
|
 | OPC-474 CLONING CABLE, used for
handheld-to-handheld data cloning
|
 | LC-152 CARRYING CASE, useable with
any battery pack |
 | |
|