MASTERTOOL GRIP BUDDY REVIEW

MASTERTOOL GRIP BUDDY REVIEW BY JIM BAUDO

WHY BUY OR CARRY AROUND ALL THESE TOOLS?
THE GRIP BUDDY ENHANCED LOCKING PLIERS DOES IT ALL.

ABOVE PHOTOS WITH HP CAMERA, BY JIM BAUDO
ADD THE GRIP BUDDY ENHANCED HANDLE TO YOUR LOCKING PLIERS OR BUY THE GRIP BUDDY ENHANCED LOCKING PLIERS.

GRIP BUDDY ENHANCED HANDLE

GRIP BUDDY ENHANCED LOCKING PLIERS

HERE IS WHAT THE FACTORY HAS TO SAY!

The Grip-Buddy by Mastertool Company is a finely calibrated tightening and loosening handle that is used on a locking pliers to open and close the jaws with an astonishing degree of control, and more clamping power. The handle also allows you to work the tool faster, and with less physical effort.

It's the new little handle, that makes a big difference!
With a Grip-Buddy you don't hunt for the right grip, you apply it right away and eliminate all the guessing that makes you blue in the face.
Turning the handle clockwise closes the jaws, and applies the precise gripping pressures that you want.
A counterclockwise turn of the handle frees the grip, so there's no more hassling to dislodge the jaws when the lever fails to release the jaws.
No more objects dropping to the floor or busted knuckles resulting from weak grips that slip off, and waste your time.
The novel operating handle moves the jaws, so you can clamp on the jaws in tight spaces when the lever action cannot be used.
Grip-Buddy provides up to 20 percent more gripping power than all comparable pliers guaranteed.

HERE IS MY EXPERIENCE WITH THE GRIP BUDDY BY JIM BAUDO

I PURCHASED A NEW DISHWASHER FOR CHRISTMAS. I FOUND THAT BEFORE STARTING THE JOB, HAVE ALL THE NEED TOOLS READY. SOME TIMES THE TOOLS NEEDED ARE LISTED WITH THE INSTALLATION INSTRUCTIONS. I HAD BEEN USING THE GRIP BUDDY FOR ABOUT A MONTH AND IT HAD PERFORMED WELL FOR ME. THE OLD STAND BY PLIERS IN SOME CASE NEVER PROVIDED THE NECESSARY TIGHT GRIP NEED TO DO THE JOB, SLIPPING OFTEN AND MARRING THE ITEM YOUR WERE WORKING ON. THE OLD VISE GRIP AS IT IS KNOWN AS, SOMETIME WAS, IF TO TIGHT OF ADJUSTMENT AND IN THE CASE OF THE COMPRESSION FITTING NUT IF EXCESSIVE PRESSURE IS APPLIED IT WILL DEFORM THE COMPRESSION RING AND YOU WIND UP WITH A SLOW LEAK THAT IS SOMETIMES NOT EVIDENT IMMEDIATELY.

THIS IS THE OLD NUT. I HAD APPLIED EXCESSIVE PRESSURE TO THE NUT YEARS AGO AND IF YOU LOOK CLOSE AT THE VERY TOP YOU CAN SEE WHERE IT DEVELOPED A SLOW LEAK. YOU CAN ALSO SEE THE MARRING TO THE CHROME PLATED NUT.

I REPLACED THE NUT AND A COMPLETE NEW HOT WATER SUPPLY LINE TO THE NEW DISHWASHER.

I USED THE GRIP BUDDY TO DO THE JOB AND HAD NO MARRED OR DEFORMED NUTS, AND OF COURSE NO LEAKS!

I ADDED THE GRIP BUDDY ENHANCEMENT HANDLE TO A LOCKING PLIERS I CURRENTLY OWNED. I HAD ALREADY QUIT USING MY OLD PLIERS AND COULD NO LONGER EVEN FIND IT OR I WOULD HAVE INCLUDED IT IN THE ABOVE PHOTO OF THE TOOLS I WAS ABLE TO REPLACE WITH JUST 1 GRIP BUDDY. GET YOURS TODAY! JIM BAUDO

MOST ALL PHOTOS WITH HP CAMERA, BY JIM BAUDO. EMAIL YOUR COMMENTS, OR YOUR REVIEW TO JIMBAUDO@YAHOO.COM

PRODUCT AND SERVICE REVIEWS MAIN MENU

		WWW.BESTBUYDEALER.COM HAS ALL THE MY FAVORITE BRANDS OF ENCLOSED TRAILERS FOR FIELD DAY AND ALL YOUR HAULING NEEDS. SALE PRICED! Jim Baudo, N0UQZ BROWSE FOR TRAILERS NOW
WHEN IT COMES TO PONTOONS, MY FAVORITE IS BY WWW.LOGOBOATS.COM

LOGO BOATS HAVE NEW PONTOONS FROM $3395.00 SEE THEM ALL, CLICK HERE